| VFD Setting | |
|
|
Author | Message |
---|
cncdiy Admin
Posts : 45 Join date : 2010-01-13
| Subject: VFD Setting Tue Oct 19, 2010 10:33 pm | |
| This post discuss the HY Series Inverter produced by Huanyang Electricity Manufacture Factory 1. If your inverter has a error code "E.Lu.S" Step 1: PD200=65535 Step 2: PD209=selecting 50 2. If your inverter has a error code "E.oA.A" The frequency setting of the inverter is not matching with the VFD spindle. Please reset the parameter Step 1: PD005=400 Step 2: PD004=400 Step 3: PD072=400 Step 4: PD003=400 3. If the knob cannot be used to adjust the speed of the VFD spindle. Please reset the parameter Step 1: PD002=1 Step 2: PD070=1 4. error EL05 Please reset the parameter Step 1:PD200=65535 Step 2:PD209=100 Thank you!
Last edited by cncdiy on Mon May 16, 2011 10:10 pm; edited 1 time in total | |
|
| |
cnc
Posts : 12 Join date : 2010-10-24
| Subject: Re: VFD Setting Sun Oct 24, 2010 3:41 am | |
| cncdiy, Instead of receiving the HY series Inverter by Huanyang, I got a LBD-M280 inverter by LEDBOND ( www.jnLBD.com). Is this an equivalent inverter? There isn't a lot of information regarding this inverter and I cannot find a English manual for it. I emailed cncdiy_selling@ymail.com for one but received no reply. Can you let me know where to get a English manual for this inverter? Thanks. | |
|
| |
cncdiy Admin
Posts : 45 Join date : 2010-01-13
| Subject: Re: VFD Setting Sun Oct 24, 2010 7:40 pm | |
| | |
|
| |
cnc
Posts : 12 Join date : 2010-10-24
| Subject: Re: VFD Setting Thu Oct 28, 2010 8:40 pm | |
| | |
|
| |
s
Posts : 1 Join date : 2010-12-09
| Subject: DZB200M Thu Dec 09, 2010 4:51 pm | |
| | |
|
| |
cncdiy Admin
Posts : 45 Join date : 2010-01-13
| Subject: Re: VFD Setting Thu Mar 03, 2011 10:33 am | |
| | |
|
| |
maxcnc
Posts : 1 Join date : 2011-01-14
| Subject: Re: VFD Setting Fri Apr 08, 2011 11:30 am | |
| | |
|
| |
robertmelkonyan
Posts : 1 Join date : 2011-08-08
| Subject: Re: VFD Setting Mon Aug 08, 2011 12:09 pm | |
| hello dear Very much to you, please, please help set up the inverter, it accelerates very slowly, please tell me what setting in charge of typing speed spindle speed? thanks in advance | |
|
| |
cwb449
Posts : 1 Join date : 2011-12-20
| Subject: Re: VFD Setting Tue Dec 20, 2011 10:42 am | |
| My VFD is the HY02D223B. MY VFD has r00.00 flashing all the time. Any idea as to what PDXXX to change from frequency to RPM. When I start the spindle it will read r00.00 at start, then ramps up to r400.0 at full speed. Has anyone had this problem??
Any help would be great. | |
|
| |
c.bourgoin
Posts : 11 Join date : 2011-11-22
| Subject: Re: VFD Setting Wed Jan 11, 2012 6:22 am | |
| now you really understand the "do it yourself" part of CNC DIY.
I'm sorry for your problem but you won't find any help from the vendor here.
| |
|
| |
hotzenplotz
Posts : 1 Join date : 2012-01-24
| Subject: Re: VFD Setting Tue Jan 24, 2012 2:25 pm | |
| hi evrybody, i found this one: (sorry - new members are not allowed to post urls) maybe the mail-address of lovehappyshopping brings help, i bought my inverter from this guy hotzenplotz | |
|
| |
Sponsored content
| Subject: Re: VFD Setting | |
| |
|
| |
| VFD Setting | |
|