Share your experience with CNCDIY's Machine
HomeCalendarGalleryFAQSearchMemberlistUsergroupsRegisterLog in

Share | 

 Spindle Borch 9060 doesn't work

Go down 

Posts : 4
Join date : 2011-07-21

PostSubject: Spindle Borch 9060 doesn't work   Thu Jul 21, 2011 8:31 pm

Our machine is type: CB-B4-002 4 axis controller with embedded VFD 1.5kW spindle inverter, but we have only 3 axis.

We have bought it and set Mach3 up exactly as the manual describes but the spindle doesn't turn.

We have tried all diferent settings and we had a short movement in it for less than a second once, just with the normal settings. It straightly has an E-stop or gives that the PWM bumped into a minimum setting.

What can be the problem?

Back to top Go down
View user profile

Posts : 11
Join date : 2011-11-22

PostSubject: Re: Spindle Borch 9060 doesn't work   Thu Dec 08, 2011 1:14 am

Hi sign121,

the values in the manual are completly false.
Have a look at my topic here

You can try my values and if it still doesn't work you will have to find your own by testing it manualy.
It can be done quickly (within 30minutes)

or you can also unmount the break out board ( the small board connected to the // port) and check the inpout/output with a multimeter.I have placed lots of usefull informations here ( in french sorry):
usefull infos about walter 6545
Back to top Go down
View user profile
Spindle Borch 9060 doesn't work
Back to top 
Page 1 of 1
 Similar topics
» release dates. how do they work (for the wii)
» Can't log in on firefox browser
» Laney's Loft - Work Required
» Leech and Hurricane Hordak revealed
» Conspiracies 2 ??

Permissions in this forum:You cannot reply to topics in this forum
CNCDIY Club :: CNCDIY's Products :: CNCDIY's Electrical-
Jump to: