Share your experience with CNCDIY's Machine
HomeCalendarGalleryFAQSearchMemberlistUsergroupsRegisterLog in

Share | 

 Corian lithophane (now in colour!)

Go down 

Posts : 14
Join date : 2011-01-26

PostSubject: Corian lithophane (now in colour!)   Thu Jul 21, 2011 11:47 pm

Hi Folks,

Here is one of my latest projects. Very similar to the 'black and white' one I posted previously but I added a colour transparency to the back to make it colour. Many thanks to BSImages on the Vectric forums for some of the hints on how to get the best results (

I found that if I did a first pass with a 1/8" ball nose followed by a 1/8" 45deg 0.1 tip bit worked great, although I did need to set the zero height for the final pass 0.2mm lower than the ball nose pass or I got some lines across the finished job.

Back to top Go down
View user profile

Posts : 3
Join date : 2013-01-11

PostSubject: Re: Corian lithophane (now in colour!)   Sat Feb 16, 2013 1:05 am

Thank you for the picture.
I used to have a Frenchie just like that when I was learning to walk.
She would push my backside every time I tried to stand up Laughing
Back to top Go down
View user profile
Corian lithophane (now in colour!)
Back to top 
Page 1 of 1
 Similar topics
» What's Your Hair Colour?
» What's Your Favourite Cotton Candy Colour?
» Quick reply colour tweak??
» Help decide my colour schemes

Permissions in this forum:You cannot reply to topics in this forum
CNCDIY Club :: Experience Sharing :: Plastic and Composite Processing-
Jump to: